Use of Oils for the Protection of Clay Mortars

Authors

  • Aspasia Karozou Aristotle University of Thessaloniki, Thessaloniki
  • Maria Stefanidou Aristotle University of Thessaloniki, Thessaloniki

DOI:

https://doi.org/10.6092/issn.1973-9494/9230

Keywords:

clay mortars, oils, surface protection

Abstract

In this study an effort has been made to find innovative and sustainable ways of increasing the hydrophobicity of clay-based mortars used in restoration by applying natural oils on the surface of selected samples. The concept was to find a new way of protecting the surface of these materials, but also to promote the idea of sustainability by using natural and recycled cooking oils. Thus, the oils applied for the surface protec­tion of the mortars were hemp oil, borage oil (natural) and recycled spent cooking oil. The tests conducted on the treated specimens were, a capillary absorption test, drying test, porosity, Karsten tube test, stereoscopic observation, color alteration using Mun­sell charts, water vapor test and absorption of water droplet test. The results indicate the protective role of all the oils, since they reduce porosity and water uptake. Borage and hemp oil tend to alter the color of the specimens, but offer increased hydropho­bicity, while the latter allowed the faster drying of the samples. The water vapor test indicates again the low level of water loss from the surface of the treated specimens, while for the specific test a sample with an admixture of recycled cooking oil inside the clay mass was created.

Downloads

Published

2018-12-31

How to Cite

Karozou, A., & Stefanidou, M. (2018). Use of Oils for the Protection of Clay Mortars. Conservation Science in Cultural Heritage, 18(1), 121–133. https://doi.org/10.6092/issn.1973-9494/9230

Issue

Section

Articles